Hamarain Center, Deira, Dubai, UAE [email protected]

Permit To Work Software in KSA Oman & Qatar

Expedite IoT > Permit To Work Software in KSA Oman & Qatar
Removebg Preview
Expedite IoT

Digital Permit to Work Software

Our meticulously crafted Permit-to-Work (PTW) software revolutionizes permit lifecycle management, seamlessly integrating operational, maintenance, shutdown, project, and unscheduled work processes. This cutting-edge solution enhances operational efficiency, productivity, and safety compliance.

  • Real-time synchronization across departments
  • Customizable to adapt to unique business needs
  • Improved safety compliance
  • Streamlined permit management

On oil, gas, petrochemical, utility and industrial sites, the permit to work system is one of the most important safety controls. It makes sure hazardous work, such as hot work, confined space entry, electrical isolation or work at height, is properly assessed, authorised and closed out. Paper permits make that hard: they get lost, signatures are chased around the site, isolations are not linked to permits and nobody has a live view of what work is happening where. Our digital permit to work (ePTW) software replaces paper with a controlled, auditable workflow, used by operators and contractors across Saudi Arabia, Qatar and Oman.

What the software does

Permit creation and approval

Requesters raise permits on a tablet or computer. The system applies the right form, checklist and approval chain for each permit type, and approvers sign digitally.

Permit types

Hot work, cold work, confined space, electrical, excavation, work at height, radiography, diving and any custom types your procedures define.

Risk assessment and job safety analysis

Hazards, controls and risk matrices are captured as part of each permit, using your own templates.

Isolation management

Electrical, mechanical and process isolations are recorded, linked to permits and tracked through lock-out tag-out, so no permit is closed while isolations are still in place, and no isolation is removed while work is ongoing.

Conflict checking

The system warns when two permits in the same area could interact, for example hot work near a gas-freeing operation.

Simultaneous operations view

A live map or list shows every active permit by area, so control room operators and supervisors know exactly what work is underway.

Gas testing and checks

Gas test results and periodic checks are recorded against the permit with time stamps.

Close-out and handover

Permits are suspended, transferred between shifts and closed with confirmation that the area is safe.

Audits and reports

Every action is logged with who, what and when. Reports show permits by type, area and contractor, overdue permits and audit findings.

Linking permits to people and access

Permits are only as good as the people working under them. The software can check that workers named on a permit have valid training and certificates, and it can connect to access control and contractor control, so only authorised workers can enter the work area while the permit is active.

Configurable to your procedures

Every company’s permit procedures are different. The software can be configured with your own forms, fields, labels, checklists, risk matrices and approval hierarchies, so it follows your safety management system rather than forcing you to change it.

Integration

  • ERP and maintenance systems such as SAP and Oracle, so work orders create permits automatically
  • Active Directory and single sign-on for secure user access
  • Email and mobile notifications for approvals and alerts
  • Document management for procedures and drawings

Works on site

Tablets and rugged devices can be used in the field, including intrinsically safe devices for hazardous areas where required. The app can work offline in areas with poor coverage and synchronise when back in range.

Benefits

  • Safer work: consistent risk assessment and approval for every job
  • Fewer delays: approvals routed instantly, not chased on paper
  • Full visibility: live view of all permits and isolations
  • Better audits: complete digital records
  • Learning: data on permit types, delays and findings to improve procedures

Example scenario: a petrochemical plant shutdown

Picture a planned shutdown at a plant in the Eastern Province with hundreds of permits over several weeks and many contractors on site. With paper permits, the permit office becomes a bottleneck and isolation records are hard to reconcile. With ePTW, permits are prepared before the shutdown and linked to work orders, contractors’ training is checked automatically, conflicts between jobs in the same area are flagged, and the control room sees every active permit and isolation on screen. At the end of each shift, permits are handed over digitally.

Common problems with paper permits

Paper permit systems are familiar, but they hide risks:

  • Lost or unreadable permits: handwriting, rain, dust and lost copies make records unreliable.
  • No live picture: the control room cannot easily see every active permit and isolation on site.
  • Missed conflicts: two teams can be working near each other on incompatible jobs without anyone noticing.
  • Slow approvals: permit holders walk around the site to find signatories, delaying work.
  • Weak audit trail: investigators cannot easily see who approved what, and when.
  • No learning: data on delays, rejected permits and findings stays in filing cabinets.

Investigations into serious incidents at industrial sites around the world have often found failures in permit and isolation control. A digital system does not replace good procedures and competent people, but it makes the right steps much harder to skip.

Roles in the digital workflow

RoleWhat they do in the system
Permit requesterRaises the permit, describes the job, attaches drawings and risk assessment
Area authorityReviews the work area, sets precautions and approves
Isolation authorityApplies and confirms isolations, links them to the permit
Gas testerRecords gas test results at the required intervals
Permit holderAccepts the permit, briefs the team and confirms completion
Control roomSees all live permits and isolations, manages conflicts
HSE teamAudits permits, reviews trends and improves procedures

Each role sees only the actions they are responsible for, and every signature is time stamped.

Contractor management

Contractors carry out much of the hazardous work on industrial sites. The software keeps a register of contractor companies and workers, with training records, certificates, medical fitness and site inductions. When a permit names a worker whose certificate has expired, the system flags it before approval. Contractor performance, such as permit rejections and audit findings, can be reviewed at the end of each job.

Rolling out ePTW without disrupting operations

  1. Review current procedures and decide which permit types to digitise first.
  2. Configure forms and workflows with your HSE team.
  3. Pilot on one area or unit, running alongside paper for a short period.
  4. Train users by role, including contractors.
  5. Expand site by site, with support on the ground during go-live.
  6. Review data after three months and refine procedures.

Data security and hosting

Permit records are critical safety data. The system can be hosted on your own servers or in a regional cloud, with role-based access, encryption, backups and integration with your identity systems. This suits organisations working under national cybersecurity requirements in Saudi Arabia, Qatar and Oman.

Dashboards and key indicators

Dashboards show active permits by area and type, permits waiting for approval, average approval time, overdue close-outs, isolations still in place and audit findings. HSE managers can drill down from a site summary to an individual permit, and weekly reports can be emailed automatically to management.

What good looks like after go-live

Sites that adopt a digital permit system usually notice the difference within weeks. The control room knows exactly what work is live in every area at any moment. Approvers receive requests on their devices and can review the job, location and risk assessment before signing, rather than signing a paper form handed to them in a corridor. Shift handovers are cleaner because open permits and isolations are listed on screen. When an auditor or investigator asks for a permit from six months ago, it is found in seconds, complete with every signature and gas test.

Permit to work and site access together

On high-hazard sites, controlling who is allowed into an area is part of safe work. Linking permits to the site access control system means a worker can enter a restricted unit only when they are named on an active permit for that area, and their access ends when the permit is closed. In an emergency, the system shows who is inside each area and under which permit, which helps muster checks and rescue planning. This connection between safety software and physical security is one of the reasons operators work with Expedite IoT.

Streamlined PTW System1
WhatsApp Image At 12.20.19 3218f0e8
Permit to work software features: flexible configurations, user access and scheduling
WhatsApp Image At 11.46.22
Permit to work software dashboard screens
WhatsApp Image At 10.13.47 Ca735235
WhatsApp Image At 14.33.46 054b6b24
WhatsApp Image At 12.54.59 E7b5b6bd
WhatsApp Image At 15.11.54 Cf48f60c
WhatsApp Image At 15.20.24 A4391534
WhatsApp Image At 10.40.32 F86059ed

Benefits Of Permit to Work Software

02
Improved Safety of PTW System
02
Better Compliance Fulfillment
02
Environmental Benefits
02
Increased Operational Efficiency
02
Data security & Administration
02
Global Industrial Compliance
02
Superior Support Service
02
Effective Implementation
02
Mobility & Multilingual
Gain Control Flexibility With Permit To Work Software

Industries Served

WhatsApp Image At 12.39.41 156de88f

WhatsApp Image At 12.39.43 E84fdd29

WhatsApp Image At 12.39.43 Aad342c7

WhatsApp Image At 12.39.41 5fdbe1dc

WhatsApp Image At 12.39.43 A2a5f4ec

WhatsApp Image At 12.39.42 2d6ce856

WhatsApp Image At 12.39.41 23dfd9e2

WhatsApp Image At 12.39.44 594a85bb

WhatsApp Image At 12.39.42 E8d5f6c8

WhatsApp Image At 12.39.42 Eac940aa

Frequently asked questions

What is a permit to work system?

It is a formal process that controls hazardous work by making sure it is assessed, authorised, carried out safely and closed out properly.

Can the software follow our existing procedures?

Yes. Forms, checklists, risk matrices and approval chains are configured to match your safety management system.

Does it work offline?

Yes. Field devices can work offline and synchronise when connectivity returns.

Can it integrate with SAP?

Yes. The software integrates with ERP and maintenance systems such as SAP and Oracle.

Is it suitable for oil and gas sites?

Yes. It is designed for high-hazard industries such as oil, gas, petrochemicals and utilities.

Can contractors use the system?

Yes. Contractors can be given access to raise and accept permits, with their training and certificates checked automatically.

How long does it take to roll out?

A first site is usually live within a few months, depending on the number of permit types and integrations.

Does the system support lock out tag out?

Yes. Isolation points, locks and tags are recorded and linked to permits, so permits cannot be closed while isolations are still active.

Move your permits off paper